Mask Maker Machine

Automatic mask maker machine: An ideal fast production machine for flat face masks. If you need such equipments, don't hesitate to contact us.

Introduction of surgical masks

The composition of a surgical mask

1. Surgical masks are generally composed of melt-blown cloth, non-woven cloth, mask belt and nose clip. The outer and inner layers are made of non-woven clothand the middle layer is made of melt-blown cloth.The outer layer of the mask is designed to prevent droplets, the middle layer is the core functional layer forfiltering droplets, particles or bacteria, and the inner layer is mainly hygroscopic.
2. The main filter material is polypropylene melt-blown cloth, which is a kind of ultra-fine electrostatic fiber cloth. Due to the electrostatic effect, it can catch dust, and the droplet containing various viruses can be adsorbed on the surface of melt-blown cloth and cannot be penetrated.Suitable for flat mask melt-jet filtration: normal, BFE95 (95%), BFE99 (99%), VFE95 (99%), PFE95 (99%), KN90 (90%).Melt-blown cloth is generally 20 grams of weight, the higher the gram, the better the protective filtering effect, the use of N95 40 grams or even higher.Of course, if the non-woven layer is too much, the mask is hard, and the melt-blown layer is too  much, it is difficult to breathe
3. Ther materials: metal (for nose clip), dye, elastic material (for mask strap), etc.

The principle of surgical mask

Masks are mostly self-primers, which work by allowing harmful air to pass through the mask's filter before being inhaled or exhaled.The filtering mechanism of mask filter  material is shown in the figure below.

Equipment overview

Summary of the masks making machine:

This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically.The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth.

The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection.

Appearance dimension specification of one drag-two production line

Appearance dimension specification of one drag-one production line

Introduction of semi-automatic production line

Equipment size::6850mm(L)×3600mm(W)×1900mm(H);

Appearance color: RAL9003,Follow this standard unless otherwise specified;

Equipment weight: ≤5000kg, ground load ≤500KG/m2;

Compressed air: 0.5-0.7mpa, compressed air flow : about 300L/min;

Operating environment: temperature 10 ~ 35ºC, humidity 5-35%HR, no combustible, corrosive gas, no dust (cleanliness not less than 100,000).

Process flow

Raw material--Molding--Nose bridge filling-Side  pressing--Mask body welding--Slice cutting-Conveyor--  Mask ear belt spot welding--Collection--Packing--Sterilizer--EO-Final product

Our company can supply fully automatic production line to achieve the above manufacturing process Fully automatic equipment is all-in-one machine , including 1 mask slicer cutting machinery and 2 mask ear belt spot welding machines to achieve fully automatic production for raw  material feeding and packaging final product .

Automatic mask production line drag-one all-in-one machine Production speed: 45-55pcs/min

Automatic mask production line: one drag-two all-in-one machine Production speed: 90-110pcs/min

Production capacity of equipment:

Production speed: 90-110 pcs/min

Equipment production qualification rate: 98%-99% (except when raw materials not meeting requirements or employees not operating properly)

Equipment failure rate: 3% (refers to the failure caused by the equipment itself)

Equipment staffing: 1 person (1 person can monitor 1-3 production lines at the  same time)